After-sales Service: | Technical Supported |
---|---|
Warranty: | 1 Year |
Load Capacity: | 31-40t |
Drive Wheel: | 6×4 |
Seats: | ≤5 |
Tire Certification: | ECE, Gcc, ISO, DOT |
Customization: |
---|
Suppliers with verified business licenses
Model | ZZ3257N3447A1 | |||||
Engine | Make: SINOTRUK | |||||
Diesel 4-stroke direct injection diesel engine | ||||||
Engine model: WD615.69,/WD615.47 Euro II emission standard | ||||||
6-cylinder in-line with water cooling, turbo-charging and intercooling | ||||||
Maximum output: 336 hp (247 Kw) at 2200 rpm /371hp | ||||||
Maximum torque: 1350 Nm at 1300-1600 rpm | ||||||
Number of cylinder: 6 | ||||||
Displacement: 9.726 L | ||||||
Bore: 126 mm | ||||||
Stroke: 130 mm | ||||||
Specific fuel consumption: 195 g/kWh | ||||||
Engine oil filling quantity: 19 l | ||||||
Cooling system filling quantity (long-term filling): 40 l | ||||||
Thermostat with 71ºC opening begin | ||||||
Twin cylinder air compressor | ||||||
Rigid fan | ||||||
Transmission | HW19710, 10 forwards and 2 reverse | |||||
Ratio: 14.28 10.62 7.87 5.87 4.375 3.26 2.43 1.8 1.34 1 13.91(R1) 3(R2) | ||||||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |||||
Front Axle | HF9, Steering with doubleT-cross section beam | |||||
Rear Axle | HC16, Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles . | |||||
Ratio:5.73 Option: 6.72 | ||||||
Chassis | Frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members | |||||
Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer | ||||||
Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer | ||||||
Aluminium fuel tank: 300 L capacity with locking fuel cap, fitted to the off side of the chassis | ||||||
Steering | ZF power steering, modol Z .F8118, hydraulic steering with power assitance | |||||
Brakes | Service brake: dual circuit compressed air brake | |||||
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels | ||||||
Auxiliary brake: engine exhaust brake | ||||||
ABS control system: for option | ||||||
Wheels & Tyres | Rims: 8.5-20, 10 hole-steel | |||||
Tyres: 12.00R20, option: 12.00R22.5 Nos: 10+1(spare) | ||||||
Driver's Cab | HW76, HOWO long cab, with two seats, one bed, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber | |||||
Electrics | Operating voltage: 24 V, negative grounded | |||||
Starter: 24 V, 5.4 Kw | ||||||
Alternator: 3-phase, 28 V, 1500 W | ||||||
Batteries: 2 x 12 V, 165 Ah | ||||||
Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||||||
Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | |||||
of compressed air pressure, coolant temperature, engine oil pressure and battery charging | ||||||
Dimensions mm | Wheel base | 3625+1350 | ||||
Front wheel track | 2022 | |||||
Rear wheel track | 1830 | |||||
Front overhang | 1500 | |||||
Rear overhang | 1670 | |||||
Approach angle (0) | 19 | |||||
Departure angle (0) | 26 | |||||
Overall length | 8145 | |||||
Overall width | 2496 | |||||
Overall height | 3386 | |||||
Dimension of the rear dump body | 5400*2300*1400 | |||||
Type of hoist system | Underbody "T" shape | |||||
Weight kg | Dead weight | 12420 | ||||
Gross vehicle weight | 41000 | |||||
Front axle loading capacity | 9000 | |||||
Rear axle loading capacity | 2*16000 | |||||
Performance | Maximum driving speed (km/h) | 75 | ||||
Maximum gradeability (%) | 32 | |||||
Minimum ground clearance (mm) | 298 | |||||
Fuel consumption (l/100 km) | 38 | |||||
The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! |
Price advantage:
We sell in factories without middlemen, so our price will be better than that of trading companies.
Quality advantage:
From the moment the customer places an order, we will be equipped with a professional team. Professional personnel are responsible for the design, production, tracking and transportation. We adopt the principle of responsibility system, and the quality can be guaranteed.
Professional advantages:
We have our own R & D team and design team. Our team has received professional training and good education, and is skilled in using CAD, SW and other drawing tools
Service advantages:
The staff will give the most favorable and accurate quotation to the customer within 2 hours according to the customer's requirements, make the most appropriate purchase scheme for the customer, and formulate the perfect solution according to the customer's after-sales demand within 10 hours.
1.What is the delivery date?
It usually takes 15 to 25 days of receiving the deposit.
2.Payment and mode of transportation?
We accept both T/T and D/P .
Bulk, rolling, loading, land transportation, I will actively provide customers with cheaper transportation.
3. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
- 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben, Volve...
- If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.
4.Can you satisfy my special requirement?
Definitely!We can make the trailers or trucks based on your requirement.
Suppliers with verified business licenses