| Customization: | Available |
|---|---|
| After-sales Service: | Technical Supported |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
LUCKIN Edible Oil 46000liters semi-trailer oil tanker: the framework is made of aluminum alloy, the standard configuration is three-axis steel plate suspension, 13 tons of axle, widened brake pads, 12 pcs tires, a full set of European standards for single warehouse, 28 tons of single acting legs, 90 traction pins.
LUCKIN tank volume is 45m3 (edible oil) according to the announced size. The tank is made of aluminum alloy with 6mm thick and 6mm thick water pressure head. Without pump, it is divided into two silos. The two silos are divided equally. The two silos are independent and interconnected by ball valves. It is equipped with two European standard filling ports and two pneumatic submarine valves (two sets of European standard, two lower filling ports, oil and gas recovery, anti overflow probe rod and socket, etc.) with lifting guardrails, The automatic closing system of emergency shut-off valve is standard for other manufacturers.
Features:
1. Due to the use of aluminum alloy material, the self weight of aluminum alloy oil tank truck is lighter. Reducing the self weight can increase the payload of the whole vehicle, and the weight of goods transported in a single time is 18% - 35% more than that of carbon steel oil tank truck.
2. The chemical properties of aluminum alloy are stable. The corrosion resistance of aluminum alloy is more than 70% higher than that of ordinary carbon steel. The enhancement of corrosion resistance greatly reduces the relevant maintenance cost of tank body.
3. From the perspective of appearance, the appearance of aluminum alloy oil tank truck is more beautiful, without painting and easy to clean.
4. Service life: the excellent characteristics of aluminum alloy make the service life of aluminum alloy oil tank truck longer. The old aluminum alloy tank body with good maintenance can also be used on the new chassis. Even if the tank body is scrapped, it has high recycling value.
5. Handling: the center of gravity of the aluminum alloy tank car is relatively low, and the braking is easier, which makes the vehicle handling better. The aluminum alloy can also absorb the energy of collision in the accident through effective deformation (the possibility of later repair and recovery is higher), which improves the driving safety.
6. Aluminum alloy is a non combustible material, which is not easy to produce sparks and has lower static electricity accumulation.
| Main Dimensions | |
| Overall Length | 12900mm |
| Overall Width | 2500mm |
| Overall Height | 3750mm |
| Tare Weight | Approximate 7300KGS |
| Loading Capacity | 45m3 |
| Filling Weight | 36000Kgs |
| Tank Body | |
| Shape | Mono block Cylinder |
| Total Volume(m3) | 45CBM |
| Tanker Body Material | 6mm Stainless Steel 304-2B |
| End plate | 6mm Stainless Steel 304-2b |
| Lifting Ladder | Including Top walkway and backside Aluminum material |
| No.of Compartment | 5 |
| Discharging Pipe | 4"rubber hose, 2 pc, 6m long |
| Accessory Parts | |
| Manhole | Model PPVL820BXB, 20inch, DOT406/20'', 5Units |
| Weld Collar | Model 3176AE 20inch, aluminum material, 5 Units |
| Emergency Valve | Model 5500, 5Units |
| API Valve | Model 5204, 5Units |
| API Dust Cap | Model 5200-25, 5Units |
| Vapour Venting | Model VR6035SQ, 5Units |
| Overfill Sensor | Model FT101-12, 12'', 5Units |
| Drop Adaptor | Model 4530, 2Units |
| Air Interlock | Model 500AI, 1 Unit |
| Vapour Valve | Model VR4100, 1 Unit |
| Vapour Cap | Model VR4050PL, 1Unit |
| Socket | Model FT300GW, |
| Air Controllor | Model AD14PP5ALFS for 5 compartments |
| Chassis | |
| Main Beams | Special design I beam, Aluminum Saddle support 7 No's each side. |
| Axle | 3 axles |
| BPW 13 Ton, first axle retractable Model No HZM13010 | |
| Landing Gear | JOST brand C200,Two-speed, manual operating, heavy duty landing gear |
| King Pin | JOST brand 2" bolt-in king pin |
| Suspension | BPW air suspension, Model No HZMSLM12010 |
| Pneumatic Braking System | 2 relay valve; T30/30+T30 Spring brake chamber; 45L air tanks. |
| Wheel rim | 11.75-22.5 Tubeless wheel rim 7pcs |
| Tire | 385/65R22.5 Tubeless Radial Tyre 7pcs, Michellin Brand Stainless steel aluminum fenders |
| ABS System | Fitted with 4s/2m Type (WABCO ,Germany brand) |
| Other Design and parts | 1.Vapor recovery system. 2.Dust Board to Cover the Tires 3.Rear and side lights. 4.Rear Ladder to access the top of the tanker. 5.Aluminum Crown to whole length of Tank. 6.Walkway with foldable handrail. (air operated) 7.Tool Box 120cm (Without Tools). 8.Double Spare Tire Carrier (Winch Type). 9.Water tank, European type. 10. 4 No's of fire extinguisher holder. 11. 5 No's of Manhole 12. Overfill prevention sensor/Overfill prevention socket. 13. Vapor adapter/Vapor vent valve/API loading and unloading valve 14. Strobe light 15. first emergency kit 17. Stainless steel rear bumper |
Price advantage:
We sell in factories without middlemen, so our price will be better than that of trading companies.
Quality advantage:
From the moment the customer places an order, we will be equipped with a professional team. Professional personnel are responsible for the design, production, tracking and transportation. We adopt the principle of responsibility system, and the quality can be guaranteed.
Professional advantages:
We have our own R & D team and design team. Our team has received professional training and good education, and is skilled in using CAD, SW and other drawing tools
Service advantages:
The staff will give the most favorable and accurate quotation to the customer within 2 hours according to the customer's requirements, make the most appropriate purchase scheme for the customer, and formulate the perfect solution according to the customer's after-sales demand within 10 hours.
RELATED PRODUCTS:
1.What is the delivery date?
It usually takes 15 to 25 days of receiving the deposit.
2.Payment and mode of transportation?
We accept both T/T and D/P .
Bulk, rolling, loading, land transportation, I will actively provide customers with cheaper transportation.
3. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
- 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben, Volve...
- If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.
4.Can you satisfy my special requirement?
Definitely!We can make the trailers or trucks based on your requirement.
){kind=link}